Battle Area Clearance

 

UPEX® 745 P²I

For on-surface and borehole operations, Optimization for different detection tasks, Wide detection ranges and high sensitivity.

The new UPEX® 745 P²I system offers substantial advantages in subsurface search due ti its flexibility and the wide choice of transmitter and receiver components . The  UPEX® 745 P²I can be optimized for different tasks and operations. It is well suited to standard surface usage as well as for borehole inspection. Due to an improved decoupling from the inspected medium the typical interference from soil magnetic effects ( i.e. basalt rock) can be suppressed. Therefore unwanted signals from small scrap can be eliminated. In comparison to conventional magnetic surveys it. allows much larger grids with substantially fewer boreholes. This reduces cost, improves revenue even when submitting very competitive offers. The productivity increase of the UPEX® 745 P²I technology will certainly have an extra impact on business development as clearance tasks, which were far beyond available budgets before, could now come under consideration. 

 

Magnetometer MAGNEX® 120 LW 

Land, water and borehole use, Robust and reliable, Ergonomic Design, High sensitivity and detection range, Six sensitivity ranges to adapt to any task, Mag and flag operations, Digital surveys with single or multiple sensors.

UPEX® 740 MVM multi array systems 

Substantial increase in productivity, Easy and fast to assemble, simple logistics, Single and multi-coil configurations. 

EBINGER offers diverse sensors and search systems in handheld or wheeled version and meet the different operational requirements. The large loop metal detector UPEX® 740 is the basis for a number of vehicle-supported multi-array systems, which improve productivity and data quality in large area surveys. 

The UPEX®  740 MVM multi-channel Vehicle system is very effective for the inspection of wide areas and fast road opening. The multi array version can take up to 8 sensor loops to scan a large surface. The alarm system of the electronics can be pre-adjusted to alarm only upon detection signals which exceed preset values. This is to cancel unwanted detection signals resulting from surface bound scrap metal. Optionally the UPEX® 740 MVM can be equipped with a paint spray system to mark the areas where relevant detection results were obtained.

Large loop metal detector UPEX® 740M 

Large Loop Pulse Induction metal detector for BAC. The UPEX® 740 M is an ideal tool for the subsurface search on UXO and to survey large areas. The support frame for the sensing loop can be assembled in a 1m x 1m shape or in a 2m x 1m. The device has become a 'work horse' in BAC tasks as it is easy to use and to train and provides a larger detection range on medium or large sized munitions than standard PI detectors. UPEX® detects ferrous and non-ferrous metal objects. In adequate terrain it can inspect up to 2,5 ha/per day and machine. 

To improve work progress even further the UPEX® is equipped with a DELAY adjuster. This feature serves to desensitize the search equipment against small metal scrap and unwanted fragments from exploded ordnance. 

Target acquisition is indicated in realtime by an audio alarm and a galvanometer or a watertight and shockproof LED bargraph. For a digital survey detection data/results can be recorded by means of the EPAD® Data logger. The detection data can be downloaded later onto a Laptop or PC for processing and visualisation by the EPAS® software. This version meets the requirements of GIS systems and greatly supports QA/QC. 

UPEX® 740 M is by far simpler to use than magnetic anomaly locators and compares in most features to a standard metal detector. Detection signals are easy to interpret and no advanced training is required for the operators. UPEX® can be operated by two or by one operator, depending on the accessories chosen. 

The system is available in single loop or multiple loop configuration and can be operated as handheld unit or from a vehicle platform. The search loop is watertight and can be operated in or on shallow waters. 

 

Deep search metal detector TREX® 150  

Deep search, search of large areas, Wide span of detection field, High productivity, Detects all metal, particularly effective on aluminium, Visual and audible detection signals, Suppresses small sized clutter, Selective to deep buried objects with large surface area, Preferred for computer assisted operation.

 

Underwater magnetometer MAGNEX® 130 

Compact-sturdy-handy, Easy to operate, Visual and audible detection signals, Audio indication of field polarity, Three sensitivity ranges: 1 – dynamic (LOW) 2 – quasi static (MED) 3 – static (HIGH),  Modular. 

Unlike the other metal detectors described, the MAGNEX® 130 is an iron locator (magnetometer) which detects only ferromagnetic objects. The handy underwater locator is primarily used for detecting underwater EOD.

 

Underground Marking System EBEX® 300 

• Simple operation
• Selective detection of targets
• Frequency and colour coding
• Multi frequency locator
• Minimized interference
• Rugged design 

 

 

Underwater Systems

 

Metal detector UWEX® 722 T  

For land and underwater use, Simple operation, Static search mode, Audible alarm, Detects all sorts of metals, Low battery consumption, Audio battery monitoring, Search head/electronics form one watertight, rugged unit, Large detection range, Audio coded information on the object character, Compatible with salt water. 

 

Underwater metal detector UWEX® 722 C  

For use on land and underwater. Simple operation, Static search mode, Audible alarm, Detects all sorts of metal, Audio battery monitoring, Low battery consumption, Compatible with seawater.

Underwater handheld metal detector UWEX® 720 C  

Compact-rugged-handy, Easy to operate, Detects alloys, ferrous and non ferrous metal, High detection sensitivity, Clear audio signals, Saltwater proof, Extendable. 

 

Metal detector UWEX® 725 PA  

Underwater and normal land use, easy to operate, Dynamic/static search mode, Automatic compensation, Large detection range, Audio battery control, Low magnetic interference, Exchangeable headset.

 

Metal detector UWEX® 725 K  

Underwater and normal land use, Versatile PI-system, Exchangeable components various search heads/large loop, rods battery container, headset, Bi-polar transmission signal, Dynamic/static search mode with or without ground compensation, Large detection range (max. factor 4 in air), Audio function monitoring, Audio battery control.

 

Underwater magnetometer MAGNEX® 130 

Compact-sturdy-handy, Easy to operate, Visual and audible detection signals, Audio indication of field polarity, Three sensitivity ranges: 1 – dynamic (LOW) 2 – quasi static (MED) 3 – static (HIGH), Modular. 

Unlike the other metal detectors described, the MAGNEX® 130 is an iron locator (magnetometer) which detects only ferromagnetic objects. The handy underwater locator is primarily used for detecting underwater EOD.

 

Metal detector UPEX® 722 LT  

Rugged, versatile PI detector system, Lightweight and simple to use, Waterlight search heads, Compatible to seawater, Folding large loop of light weight, Audio object/search information, Low power consumption, Small PP3 9V battery.

Metal detector UPEX® 728 

Flexible PI system, Interchangeable probes and search loops, High sensitivity, Ground compensation, Compatible with seawater, Detects nuggets, PA function visual/audible, Continuous tone scale - amplitude/frequency, Extensive accessories. 

Highly sensitive, deep search pulse induction system with ground compensation for professional applications. The type 728 is an attractive new development which belongs to the well-proven UPEX® detector family. It does not only detect small gold nuggets, coins and other valuable metal objects, but also metal objects, which are buried at depth and difficult to reach with light excavation tools. A PA-function analyses the signature of the object and indicates visually and audible whether the objects are of a long or short decay time. This method has its specific advantages which eases the search after objects of defined character.

Magnetometer MAGNEX® 120 LW  

Water-, borehole and normal land use, Rugged and reliable, Ergonomic design, Stable search mode, Six sensitivity ranges (3.000-1.000-300-100-30-10 nT), Audible pinpointing, Ranges of application: 'Mag and flag', analogue (audible/visual signals), Computer supported mapping, single and multichannel versions.

Large loop metal detector UPEX® 740M 

Large Loop Pulse Induction metal detector for BAC. The UPEX® 740 M is an ideal tool for the subsurface search on UXO and to survey large areas. The support frame for the sensing loop can be assembled in a 1m x 1m shape or in a 2m x 1m. The device has become a 'work horse' in BAC tasks as it is easy to use and to train and provides a larger detection range on medium or large sized munitions than standard PI detectors. UPEX® detects ferrous and non-ferrous metal objects. In adequate terrain it can inspect up to 2,5 ha/per day and machine. 

To improve work progress even further the UPEX® is equipped with a DELAY adjuster. This feature serves to desensitize the search equipment against small metal scrap and unwanted fragments from exploded ordnance. 

Target acquisition is indicated in realtime by an audio alarm and a galvanometer or a watertight and shockproof LED bargraph. For a digital survey detection data/results can be recorded by means of the EPAD® Data logger. The detection data can be downloaded later onto a Laptop or PC for processing and visualisation by the EPAS® software. This version meets the requirements of GIS systems and greatly supports QA/QC. 

UPEX® 740 M is by far simpler to use than magnetic anomaly locators and compares in most features to a standard metal detector. Detection signals are easy to interpret and no advanced training is required for the operators. UPEX® can be operated by two or by one operator, depending on the accessories chosen. 

The system is available in single loop or multiple loop configuration and can be operated as handheld unit or from a vehicle platform. The search loop is watertight and can be operated in or on shallow waters.

Metal detector EB 201 D  

Detector for all metals, Rugged construction, Simplest operation, Stable search mode, High sensitivity, Low ground effects, Not compatible with seawater, Threshold  less audio  signal, High dynamic indication, Low  battery  consumption. 

 

Deep search metal detector TREX® 150  

Deep search, search of large areas, Wide span of detection field, High productivity, Detects all metal, particularly effective on aluminum, Visual and audible detection signals, Suppresses small sized clutter, Selective to deep buried objects with large surface area, Preferred for computer assisted operation.

 

 

De-mining Systems 

Despite the fact that more than 140 nations have committed themselves to the Ottawa agreement on the eradication of land mines progress in clearance is slow and an end of the clearance process is not yet in sight. The discrepancy between the available funding and the size of this task is was our motivation to substantially improve the efficiency and productivity of our detection technology. EBINGER focused the development on detection equipment that is not only reliable in adverse working conditions but additionally for use in remote, post-conflict areas of the third world. 

 

Metal detector EBEX® 422 GC

• Enhanced detection performance on minimal amounts of metal
• Reduced sensitivity to small melt-fragments in battle area clearance
• High productivity and minimized operating cost 

 

Large loop metal detector UPEX® 740M 

Large Loop Pulse Induction metal detector for BAC. The UPEX® 740 M is an ideal tool for the subsurface search on UXO and to survey large areas. The support frame for the sensing loop can be assembled in a 1m x 1m shape or in a 2m x 1m. The device has become a 'work horse' in BAC tasks as it is easy to use and to train and provides a larger detection range on medium or large sized munitions than standard PI detectors. UPEX® detects ferrous and non-ferrous metal objects. In adequate terrain it can inspect up to 2,5 ha/per day and machine. 

To improve work progress even further the UPEX® is equipped with a DELAY adjuster. This feature serves to desensitize the search equipment against small metal scrap and unwanted fragments from exploded ordnance. 

Target acquisition is indicated in realtime by an audio alarm and a galvanometer or a watertight and shockproof LED bargraph. For a digital survey detection data/results can be recorded by means of the EPAD® Data logger. The detection data can be downloaded later onto a Laptop or PC for processing and visualisation by the EPAS® software. This version meets the requirements of GIS systems and greatly supports QA/QC. 

UPEX® 740 M is by far simpler to use than magnetic anomaly locators and compares in most features to a standard metal detector. Detection signals are easy to interpret and no advanced training is required for the operators. UPEX® can be operated by two or by one operator, depending on the accessories chosen. 

The system is available in single loop or multiple loop configuration and can be operated as handheld unit or from a vehicle platform.

 

Magnetometer MAGNEX® 120 LW 

• Suitable for use on land and water
• Robust and reliable
• Ergonomic design
• Stable search behavior
• Reduced false alarms caused by tilting probe
• Good resolution capacity
• Acoustic pinpointing
• Digital multi-channel systems 

 

Underground Marking System EBEX® 300 

• Simple operation
• Selective detection of targets
• Frequency and colour coding
• Multi frequency locator
• Minimized interference
• Rugged design

Metal detector UPEX® 728 VS 

• simple to operate
• reduced human factor
• highest detection sensitivity
• sensitivity steps: Low-Med-High
• PI-soil compensation
• precise Pin Pointing
• clear signals
• audio object information
• good value for money  

Just switch on the detector and search! Simplified operation and minimized training requirements improve work quality and reduce operator error. Other than the differential detection systems UPEX® 728 VS does not generate multiple detection signals are clearly related to the position of the target object. 

 

Pipe & Iron Locator MAGNEX® 105

• Reliable detection
• Easy to use, one knob operation
• Audible alarm
• Sealed &  lightweight unit
• Compact, rugged and reliable
• Indication of field strength and field polarity 

 

The MAGNEX® 105 is an easy to use magnetic anomaly detector designed for the detection of ferromagnetic objects buried underground. Its main application is in the detection of iron objects such as valves, pipes or magnetic underground markers.

 

Metal detector UWEX® 725 K  

Underwater and normal land use, Versatile PI-system, Exchangeable components various search heads/large loop, rods battery container, headset, Bipolar transmission signal, Dynamic/static search mode with or without ground compensation, Large detection range (max. factor 4 in air), Audio function monitoring, Audio battery control.

 

Metal detector TREX® 204 

• Robust body
• Slim search coil
• Precise pin - pointing
• High electrical stability
• High sensitivity
• Ground compensation  

 

Metal detector EBEX® 421 GC  

• Wide Band-Ground  Compensation
• Very high sensitivity
• Sturdy  modular system
• Exchangeable components
• No hindering cables
• Easy-to-use 

 

 

Security Systems

 

Walkthrough metal detector PASSEX® 100 M

• Weatherproof
• Easy to dismantle
• Low weight
• High sensitivity
• Flexible, unobtrusive design
• No danger to heart pacemakers or data storage media 

The new PASSEX® 100 M walkthrough metal detector further enhances the range of EBINGER walk-through detectors. The PASSEX® 100 M walk-through metal detector is used to seek dangerous metal objects, which are hidden on people. The PASSEX® 100 M is a cutting-edge innovation that has specific advantages of benefit to its user. It comprises an aluminum frame and metal sensor that can be easily dismantled. As it can also run on batteries is can be used independent of an external power source for several hours, including outdoors.

Walkthrough metal detector PASSEX® 210  

• Attractive, robust design
• High detection sensitivity
• Stable PI-differential method
• Minimal interference effects
• Built-in rechargeable battery
• No danger to heart pacemakers or data storage media 

The PASSEX® 210 walk-through metal detector works on the basis of the EBINGER pulse-induction differential method, which guarantees extremely high detection sensitivity and interference suppression. The PASSEX® 210 is extremely insensitive to vibration and mechanical stress. It can be operated either statically or, for automatic electrical ambience compensation, dynamically. The emergency power supply is automatically tapped if ever the mains supply is interrupted. The capacity of the built-in rechargeable battery is sufficient to provide an operation time of approximately 10 hours. The PASSEX® 210 can be dismantled for transportation purposes. Even untrained staff can assemble and put it into operation in a few minutes without any special tools.

Metal detector system EB 410  

• Set of equipment with flexible usage
• High detection sensitivity
• One-knob operation

Letter bomb metal detector MAILEX® 10  

• Efficient
• Effective
• Reliable

Inspection mirror EFIS 1 

• Light
• Robust
• With fitted  light
• Weatherproof

Inspection mirror EFIS 4 

• sturdy
• easy to handle
• illuminated
• Weatherproof
• robust
• long battery life 

Inspection mirror EFIS 5  

• Sturdy
• Easy to handle
• Illuminated
• Weatherproof
• Robust
• Long battery life 

Handheld metal detector EB 607  

• Easy to handle
• Simple to operate
• Robust design
• Automatic adjustment
• Loud  audible signal
• Visual signal

Handheld metal detector EB 610 C  

• Non-aggressive design
• Easy to use
• Automatic tuning
• Audio and visual alarms
• Self monitoring 

Handheld metal detector EB 610 D  

• Ergonomic design
• Microcontroller
• Digital funktions
• Audio/visual monitoring, self-test
• Automatic adjustment
• Digital, inherently stable signal evaluation
• Dynamic/ static search mode 

Cloverleaf handheld metal detector EB 610C/T  

• Ergonomic design
• Easy to handle
• Automatic adjustment
• Visual / audible indications
• Dynamic / Static operation

 The EB 610 C/T cloverleaf hand-held metal detector is the result of a comprehensive design study and features an intelligent mix of technical functionality and convenient handling. Its robust yet lightweight design makes it ideal for long-term inspection work. 

The C-model is standard; the T-model has acoustic modulation function (tremolo) that provides enhanced display dynamics. This helps it to better differentiate between, for instance, large and small metal parts, even in areas where disruptive factors prevail such as a high metal background. 

The EB 610 C/T cloverleaf hand-held metal detector for airport usage takes the form of a tightly sealed unit and has no parts that can be dismantled. Charging is effected externally. The standard model is equipped with  replaceable alkaline batteries or with rechargeable batteries.

Handheld metal detector EBEX® 611  

• Easy to handle
• Simple to operate
• Robust design
• Automatic adjustment
• Loud audible signal
• Visual signal

 The EBEX® 611 hand-held metal detector is a handy, environmentally sealed unit. It comprises a circular detector and cylindrical  handle. The unit can also be supplied with a ring-type detector. The rotary ON/OFF switch is inset into the handle. Once the unit has been switched on, adjustment is automatically initiated. Metal detection is indicated by means of both optical and acoustic signals.  The EBEX® 611 hand-held metal detector is cannot be disassembled (tampered with) and runs on alkaline or NiMH batteries or on NiMH batteries (NiMH batteries are removed to recharge).

 

Handheld metal detector EBEX® 612  

• Robust and reliable
• Sealed design
• Visual indication
• Dynamic / Static operation
• Variable audible signal
• Charging system for large-scale or long-term usage

 The EBEX® 612 hand-held metal detector is a handy, environmentally sealed unit. It comprises a ring-type detector and a cylindrical handle with a soft, synthetic coating. The unit can also be supplied with a cylinder-type detector. The push-button ON/OFF switch and charging socket are inset into the handle. Once the unit has been switched on, adjustment to a standard-set response sensitivity is automatically initiated. Metal detection is indicated by means of both optical and acoustic signals. The hand-held metal detector has no parts that can be dismantled. The permanently installed rechargeable NiMH battery is charged via a controlled power supply. Any additional costs incurred due to material wastage in the form of replacement batteries or damage resulting from improper handling are thus kept to a minimum.